Assembly Of External Irrigation System - Nouvag MD11 Mode D'emploi

7. Insert the spike at the end of the tubing set into the irrigation fluid bottle and hang the bottle onto the
stand.
8. Open the roller clamp on the tubing set as far as it will go.
9. Open the bleed valve beneath the drip chamber.
10. Connect the control unit to the power socket.
Ensure that the operating voltage setting corresponds to the local mains voltage.
6.4

Assembly of external irrigation system

Art. No.: 1873
A
B
C
8
7
A Art. No.: 1881
C
8
A) Secure motor cable clips and handpiece clips to the
irrigation tube.
B) Connect tube set with the external cooling tube of the
contra angle.
C) Secure clips to the contra angle and to the motor
cable.
If required, secure additional clips to the motor cable.
MD 11 Operating Instructions, Art. No. 31665, V10/14
MD 11
9