Additional Drilled Holes - Stahl 8150/1 Serie Mode D'emploi

Product Selection, Project Engineering and Modification
US
5.1

Additional Drilled Holes

US
US 5.1.1 Additional Drilled Holes by R. STAHL
 Give the following information to R. STAHL:
US
- Type
US
- Data sheet
- Quantity, manufacturers and approvals of the components that are to be installed.
US
US
R. STAHL
US
• will check whether the components, drilled hole diameters, quantity and position
correspond with the approval
US
• will create the drilled holes
US
• will mount the components
US
• will update the order documentation
• will carry out a routine test
US
• will attach a new rating plate if the technical data has changed.
US
5.1.2 Have the Customer create additional Drilled Holes
US
US
5.1.2.1 Flange Plates
US
Ascertaining the usable area for cable entries in flange plates
US
All dimensions in mm [inches]
US
US
US
US
US
US
US
US
Collision frame and earth connection of flange plate
 Select a space/area for the cable entry on the flange plate anywhere inside the collision
frame (see thin line in figure). Ensure that screw connections made later do not protrude
beyond this collision frame.
10
Terminal boxes
Series 8150/1, Series 8150/2
2 [0,08]
2 [0,08]
10 [0,39]
18104E00
212727 / 815060300170
2021-02-25·IO00·III·en·02