Cleaning And Care - Melitta AROMAFRESH Therm Mode D'emploi

setting .
• Open the swivel filter to the left .
1x4
• Fold a Melitta coffee filter at the embossed
® ®
seams and place it in the filter holder . Use your
hand to press the filter in to ensure the best fit.
• Put the ground coffee in the coffee filter. The amount
of coffee you use depends on your personal taste. We
recommend using 6-8 g of ground coffee per cup.
• Swivel the filter back into the appliance. An audible
click indicates that the filter is in place.
• Turn the appliance on using the start button ON/
OFF . Coffee preparation begins and the green
LED flashes.
• The drip stop  prevents coffee dripping when you
remove the jug from the appliance.
• The used coffee filter can be disposed of simply and
easily using the removable filter insert.
5. Using the insulated pot
• The brewed coffee flows through the central valve
in the insulated lid of the pot.
• To pour coffee press down on the sealing lever .
• Remove the lid simply by pressing the seals on the
side while lifting the lid up .
6. Timer Feature
The appliance is equipped with a TIMER. This allows
you to start brewing coffee automatically at the time
you set.
• Prepare the appliance as described in point 4. 'coffee
preparation' but without pressing the start button
ON/OFF .
• To set the required start time, hold down the
TIMER button . The first time you set it, the
time indicator and the clock symbol will flash in the
display . Set the required start time by repeatedly
pressing the h and m buttons . It is possible to
speed this up by holding in the respective button.
• Two seconds after you let go of the TIMER button
the current time will be displayed again. The start
time you selected is saved until a new time is se-
lected or the appliance is removed from the power
supply.
• Pressing the TIMER button  briefly activates the
timer feature for automatic coffee preparation. The
start time you set appears briefly in the display .
The clock symbol in the display  and the white
LED are illuminated .
• The appliance starts preparing coffee automatically
at the time you set.
• If you do not remove the appliance from the mains
electricity or programme a new start time then the
time previously set is saved.
• The TIMER feature can be deactivated at any
time by pressing the TIMER button . The white
LED  and the clock symbol  are no longer
illuminated.

7. Cleaning and care

External cleaning:
• The housing and the water tank can be cleaned with
a soft, damp cloth.
For the best coffee flavour we recommend cleaning
the bean container, the grinder and the ground coffee
chute regularly. This is easiest when the bean contain-
er and the grinder are completely empty.
Remove bean container:
- Turn the bean container anti-clockwise until the
triangular indicators are aligned .
- Remove the bean container from the appliance
and empty it completely.
• Put the bean container in place:
- Align the triangular indicators .
- Lightly press down on the bean container and
turn it clockwise until it clicks into place.
• Put a coffee filter in the filter holder .
• Empty the grinder completely:
- Set the appliance at 2 cups  and one coffee
bean .
- Press the start button ON/OFF  and allow the
appliance to grind until empty.
- After grinding use the ON/OFF button to turn
the appliance off.
• Remove the bean container  again as described
above.
Clean the grinder:
- Turn the grind level dial to 'Open' .
- Lift up the bracket and pull the grinder ring out
of the grinder .
- Clean the grinder with the cleaning brush
provided .
- To completely remove ground coffee deposits
we recommend using a vacuum cleaner.
• Open the swivel filter and dispose of the coffee
filter .
Clean the ground coffee chute:
- Holding the appliance in both hands carefully lay
it on its back.
- Now you can firstly clean the area above the
swivel filter with the brush and a damp cloth.
- To open the ground coffee chute  hold down
the button for ground coffee  for 5 seconds.
- The ground coffee chute flap opens and the
chute can be cleaned with the brush.
- To close the flap on the ground coffee chute
hold down the button for ground coffee  for
5 seconds.
- Put the swivel filter  back in place and stand
the appliance up again.
• Put the grinder ring  back in place and close
down the bracket again.
• Turn the grind level dial back into a grind position .
• Put the bean container in place again as described above.
Descaling:
Based on the water hardness you have set (see point 3)
the appliance should be descaled soon after the
CALC  indicator lights up.
• Measure out the descaling fluid according to the
manufacturers instructions and pour it into the
water tank. We recommend using Melitta
Calc Liquid for Filter Coffee & Aqua Machines".
• Briefly press the CALC button . The red LED
starts to flash .
• The current time and 'CALC' appear alternately in
the display .
• The descaling process runs automatically. To remove
even heavy calcification the descaling process takes
about 25 minutes.
• Attention: Only by running the complete descaling
process can all limescale deposits be removed. Only
then does the Calc LED  go off. Therefore the
GB
"Anti
®
10