Technical Data - V2 BLITZ-24V Instructions D'installation

EU DECLARATION OF CONFORMITY
AND DECLARATION OF
INCORPORATION OF PARTLY
COMPLETED MACHINE
Declaration in accordance with Directives: 2014/35/UE (LVD);
2014/30/UE (EMC); 2006/42/CE (MD) ANNEX II, PART B
The manufacturer (*) V2 S.p.A., headquarters in Corso Principi di
Piemonte 65, 12035, Racconigi (CN), Italy
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
BLITZ
Description: electromechanical actuator for gates
• is intended to be installed on gates, to create a machine
according to the provisions of the Directive 2006/42/EC.
The machinery must not be put into service until the final
machinery into which it has to be incorporated has been
declared in conformity with the provisions of the Directive
2006/42/EC and 89/106/CE.
• is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
Directive ROHS2 2011/65/CE

TECHNICAL DATA

Max. leaf lenght
Power supply
Idling current
Full load current
Rated power
Capacitor
Speed
Torque
Working temperature
Thermal protection
Working cycle
Motor weight
The relevant technical documentation is available at the national
authorities' request after justifiable request to:
V2 S.p.A., Corso Principi di Piemonte 65, 12035, Racconigi (CN),
Italia
The person empowered to draw up the declaration and to provide
the technical documentation:
Sergio Biancheri
Legal representative of V2 S.p.A.
Racconigi, il 01/06/2019
(*) made in extra EU Countries on behalf of V2 S.p.A.
BLITZ-24V
m 3 x 500 Kg
2,5 x 600 Kg
2 x 800 Kg
Vac / Hz 24 Vdc
A 1,5
A 7,5
W 45
μF -
Rpm 1,4 ÷ 0,5
N m 320
°C -30 ÷ +60
°C 140
% 80
Kg 14,6
- 11 -
BLITZ-120V BLITZ-230V
3 x 500 Kg 3 x 500 Kg
2,5 x 600 Kg 2,5 x 600 Kg
2 x 800 Kg 2 x 800 Kg
120 / 60 230 / 50
3,8
4,5
400
30
1,9
340
-30 ÷ +60 -30 ÷ +60
140
20
14,6
1,8
2,5
400
8
1,6
340
140
20
14,6