Anti-Collision Safety Feature; Energy Preserving Feature - ergoCentric 2L Guide De L'utilisateur

Anti-collision safety feature

The control box for the upCentric table frame includes an anti-collision
function which may reduce damage to the table in the event of collision
with a firm object. When the table is raised/lowered, the power consumption
of each leg is monitored and compared to a predetermined value. If the
power consumption for the legs is increased relative to a predetermined
value, the system assumes that there is an obstruction (collision) and the
table will stop and then run in the opposite direction up to three inches.
The sensitivity of this anti-collision feature is different when moving
downwards. The anti-collision activates with an applied force of 45 lbs (20 kg)
when moving upward, or with an applied force of 85 lbs (38.5 kg) plus weight
of the tabletop and what is placed on the table when moving downward.
Situations where the anti-collision is not activated :
• If the collision occurs during the reset operation.
• If the collision occurs within the first 2 seconds after de-activating
the handset.
• If the collision occurs downwards and the load on the table
and what is placed on the desktop is less than 85 lbs (38.5 kg).
• If the collision is not with a solid object.

Energy preserving feature

When the upCentric table is left in position for more than
3 minutes, it will go into standby mode in order to reduce energy
consumption. When adjusting your table after a dormant period,
hold the up or down button to take table out of stand by mode.
13