ergoCentric 2L Guide De L'utilisateur page 10

Step 7: Adjust the table frame
width IF REQUIRED.
Ideal frame width: 2"- 4"
(5.08 cm-10.16 cm) in from
edges of the tabletop.
ie. 58" (147.32 cm) wide tabletop,
ideal frame width would be 52"-56"
(132.08 cm-142.24 cm) wide.
Step 7 : Continued
7.1: Unclip wires from wire clips
(shown with circles) and loosen
8 bolts on inside of frame
(shown with arrows).
7.2: Adjust frame by sliding each
side in opposite directions to the
desired width.
7.3: Retighten 8 bolts on inside
of frame to secure the frame at
the desired width. Reclip wires
back into wire clips.
Step 8: Add plugs (C) into holes on
each side of the frame.
8