Panasonic Aquarea PAW-DHWM200A Notice D'utilisation page 55

OPERATION ERRORS
Despite careful production and control, the heating pump can produce errors that must be solved by an authorised service
provider.
Indicator of errors
• In case of an error on the appliance, the beeper starts beeping and field no. 4 starts flashing. When you press field no. 4 the error
code is displayed in field no. 12.
Error Description of error
E004 • Freezing. The error appears if the temperature in the heat pump
is below 5 °C.
E005 • Overheating (temperature > 75 °C, electronic regulator failure).
E006 • Mg anode error.
E007 • Volume and/or temperature sensors error.
E042 • Anti-legionella function error.
E247 • Defrosting error.
E361 • External air sensor error.
E363 • Defrosting sensor error.
WE RESERVE THE RIGHT TO ANY MODIFICATIONS NOT AFFECTING THE FUNCTIONALITY OF THE APPLIANCE.
The instructions for use are also available on our website www.aircon.panasonic.eu.
Solution
• Call the service.
• Unplug the heat pump from the power supply. Call the service.
• Call the service (heat pump functions normally).
• Call the service.
• Press field no. 4 to restart.
• Automatically turns on heating with the electric heater. When
the error is deleted, the aggregate resumes its normal operation.
• Call the service (automatically switches to the electric heater).
• Call the service (automatically switches to the electric heater).
55