Panasonic Aquarea PAW-DHWM200A Notice D'utilisation page 50

Maintenance levels
Figure 13 shows the structure of maintenance levels.
• User level (without code)
Figure 13: Maintenance levels structure
Maintenance level access
• By pressing field no. 4, you can activate the maintenance mode (Figure 14).
• A display menu with an inscription "code" in the filed CLOCK appears. Enter the maintenance code (fields FN1, FN2, FN3, FN4,
FN5 in FN6 for numbers 1, 2, 3, 4, 5, 6).
FN1
o C
FN2 TEMP CLOCK
FN3 MINUS STBY
Figure 14: Fields display
• If you do not press any field for 10 s, the programme returns to the start menu.
• If the code is incorrect, the programme returns to previous operation.
• If the code is correct, the first parameter appears on the display. The number on the right is the serial number of the parameter
and the field on the left is intended for its value.
• The first parameter :00 is a version of a software code and serves information purposes only.
• By pressing the right number (Field CLOCK in Figure 14) you proceed to the next parameter.
Installation level (code 1166)
After the first code entry for the installation level the programme allows access to the following parameters:
• :00 programme code
• :21 fan speed 20, 25, ..., 95, 100
• :27 low temperature mode YES/NO
• :34 PV function YES/NO
• :40 ventilation YES/NO
Fan speed settings (parameter: 21)
Select the parameter :21 and set the fan speed by pressing (+) or (-) (20% - 100%). See the numerical value settings on the left side
in field 5. When the fan speed is set, you can save the changes by waiting a few moments or by pressing no. 4.
50
• Installation level (code 1166)
:00 programme code
:21 fan speed 20, 25, ..., 95, 100
:27 low temperature mode YES/NO
:34 PV function YES/NO
:40 ventilation YES/NO
• maintenance level
• OEM
FN4
FN5
PLUS FN6