OHAUS Ranger 7000 Serie Mode D'emploi page 6

Zebra Label Printer Configuration
3. Setup Print Template
In order to print through the Zebra printer, the scale has to initialize the printer at the beginning of the print
template by placing the following commands in String 1:
^XA (This command should not be changed as part of any customization.)
Each line after String 1 can be either a Regular Content line of text or a Barcode Content. Each printed
item will require 3 strings to be used in order. Defender 5000 (TD52) offers 10 editable strings, which limits
a label to 7 lines of text and/or barcoding, and requires a final string to end the print template in the
Defender 5000. Ranger 7000 offers 20 editable strings, which allows more lines (max 17) of text and/or
barcoding.
Regular Content line of text uses the following format:
^FO60,120^A0N,40,20^CI0^FDCustomized
Where:

^FO is the beginning of string

60 is the horizontal coordinates for text on the label

120 is the vertical coordinates for text on the label

is the default English font – last letter defines text rotation:
^A0N
N: Normal
I: Rotated 180 degree inverted B: Rotated 270 degree bottom

40 is the height of font

20 is the font width

^CI0 is the English font library

^FD is the start symbol of content

Customized

^FS is the end symbol
For example,

The string ^FO60,180^A0,40,20^CI0^FDDesc: defines the new string and then prepares to
print

The next string Library Name will print the Library Name

The string ^FS will end the print line.
(Do not
(Do not
Contents: Can be customized
(Do not change)
Contents^FS
change)
R: Rotated 90 degree (clockwise)
change)
(Do not change)
EN-5