Service And Maintenance - Radiodetection RD8100 Guide D'utilisation

Service and maintenance

Regularly check your equipment for correct operation by using the Self-Test function
and eCert.
The locator and transmitter are designed so that they do not require regular recalibration.
However, as with all safety equipment, it is recommended that they are serviced and
calibrated at least once a year either at Radiodetection or an approved repair center.
NOTE: Service by non-approved service centers may void the manufacturer's
warranty.
Details of Radiodetection offices and distribution partners can be found at
www.radiodetection.com.
Radiodetection products, including this guide, are under continuous development and
are subject to change without notice. Go to www.radiodetection.com or contact your
local Radiodetection representative for the latest information regarding the RD8100
locator or any Radiodetection product.
©2020 Radiodetection Ltd. All rights reserved. Radiodetection is a subsidiary of SPX Corporation. RD8100, SurveyCERT, Power Filters, Peak+,
eCert, StrikeAlert, SideStep, SideStepAuto, CALSafe, iLOC, Current Direction, RD Manager, flexiprobe, flexitrax and Radiodetection are either
trademarks of Radiodetection in the United States and/or other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Radiodetection is under license. Microsoft and Windows are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries. Due to a policy of continued development, we reserve the
right to alter or amend any published specification without notice. This document may not be copied, reproduced,
transmitted, modified or used, in whole or in part, without the prior written consent of Radiodetection Ltd.
28