Product Description And Specifications - Bosch Professional GWS 30-180 B Notice Originale

a power failure or when the mains plug is pulled. This
prevents uncontrolled restarting.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for cutting, roughing and brush-
ing metal and stone materials without the use of water.
A separate protective guard for cutting must be used when
cutting with bonded abrasives.
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Technical Data
Angle Grinder
Article number
Rated power input
Rated speed min
Max. grinding disc dia- mm
meter
Grinding spindle thread
Max. thread length of mm
grinding spindle
Kickback stop
Restart protection
Soft start
Bosch Power Tools
GWS 30-180 B GWS 30-230 B GWS 30-180 PB GWS 30-230 PB GWS 30-230 B
3 601 HG0 0.. 3 601 HG1 0..
W 2800 2800
–1
8500 6500
180
M 14 M 14
25
●
●
●
(1) Spindle lock button
(2) Status indicator (LED)
(3) On/off switch
(4) Dust filter
(5) Auxiliary handle (insulated gripping surface)
(6) Protective guard for grinding with clamping lever
(7) Protective guard for grinding with locking screw
(8) Coding cam
(9) Clamping lever for protective guard
(10) Adjusting screw for protective guard
(11) Locking screw for protective guard
a)
(12) Grinding disc
(13) Clamping nut
(14) Quick-clamping nut
a)
(15) Carbide grinding head
(16) Protective guard for cutting
a)
(17) Cutting disc
(18) Grinding spindle
a)
(19) Hand guard
a)
(20) Rubber sanding pad
a)
(21) Abrasive disc
a)
(22) Round nut
a)
(23) Cup brush
a)
(24) Diamond cutting disc
(25) Extraction guard for cutting with cutting guides
(26) Handle (insulated gripping surface)
(27) Clamping flange
(28) O-ring
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
3 601 HG0 1.. 3 601 HG1 1.. 3 601 HG1 0..
2800
8500
230 180
M 14
25 25
● ●
● ●
● ●
English | 9
a)
a)
a)
2800 2200
6500 6500
230 230
M 14 M 14
25 25
● ●
● ●
● ●
1 609 92A 6ER | (10.05.2022)