Product Description And Specifications; Intended Use; Product Features; Technical Data - Bosch GWX 10-125 Professional Notice Originale

Remove the application tools before transporting the
u
power tool. This will allow you to avoid damage.
Bonded cutting and grinding discs have an expiration
u
date, after which the discs must no longer be used.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended for cutting and brushing metal,
stone, plastic and composite materials, roughing metal,
plastic and composite materials as well as making holes in
stone materials using diamond annular cutters, without the
use of water. Make sure that the correct protective guard is
used (see "Operation", page 25).
Sufficient dust extraction must be provided when cutting
stone.
With approved abrasive tools, the power tool can be used for
sanding with sanding discs.
The power tool must not be used to grind stone materials
with diamond grinding heads.

Technical Data

Angle grinder
Article number
Rated power input
Power output
A)
Rated speed
Max. grinding disc diameter/rubber sanding
pad diameter
Restart protection
Soft start
Constant electronic control
Weight according to EPTA-Proced-
B)
ure 01:2014
Bosch Power Tools

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Unlocking lever for protective guard
(2) Direction of rotation arrow on housing
(3) Lever
(4) On/off switch
(5) Standard auxiliary handle (insulated gripping sur-
face)
(6) Low-vibration auxiliary handle (insulated gripping
a)
surface)
(7) Protective guard for grinding
(8) Protective guard for cutting
(9) X-LOCK grinding disc/flap disc
(10) X-LOCK disc brush
(11) Cover for cutting
(12) X-LOCK cutting disc
(13) X-LOCK diamond cutting disc
(14) Handle (insulated gripping surface)
(15) X-LOCK holder
a)
(16) Hand guard
(17) X-LOCK backing pad for fibre discs
a)
(18) X-LOCK fibre disc
(19) X-LOCK clip for fibre discs
(20) X-LOCK cup brush
(21) X-LOCK conical brush
(22) X-LOCK diamond core cutter
(23) Extraction guard for cutting with cutting guides
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GWX 10-125
3 601 GB3 0..
W 1000
W 630
-1
min 11,000
mm 125
kg 2.2–2.5
English | 21
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
a)
GWX 14-125
3 601 GB7 0..
1400
820
11,000
125
●
●
−
2.2–2.5
1 609 92A 765 | (17.03.2022)
●
●
●