DeWalt DW004 Serie Mode D'emploi page 26

E N G L I S H
Additional safety instructions for battery packs
and chargers
Fire hazard! Avoid metal short circuiting
the contacts of a detached battery pack.
Do not store or carry the battery pack
without the battery cap placed over the
contacts.
• The battery fluid, a 25-30% solution of potassium
hydroxide, can be harmful. In case of skin
contact, flush immediately with water. Neutralize
with a mild acid such as lemon juice or vinegar. In
case of eye contact, rinse abundantly with clean
water for at least 10 minutes. Consult a physician.
• Never attempt to open a battery pack for any
reason.
• Use only chargers labelled "NiMH" or "NiMH +
NiCd" to charge D
E
• Do not expose the charger to damp or wet
conditions.
• Do not attempt to charge wet battery packs.
Labels on charger and battery pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Battery charging
Battery charged
Problem charging
+
Charges NiMH and NiCd battery packs
Do not probe with conductive objects
Do not charge damaged battery packs
Read instruction manual before use
Do not expose to water
26
WALT NiMH battery packs.
Have defective cords replaced
immediately
Charge only between 4 °C and 40 °C
See technical data for charging time
Always wear safety glasses when
plugging in the charger.
Package contents
The package contains:
1 Cordless rotary hammer drill
1 Side handle
1 Depth adjustment rod
1 Charger
1 Battery pack with battery cap
(DW004K/DW005KH)
2 Battery packs with battery cap
(DW004K2/DW004K2C/DW005K2C/
DW004K2H/DW005K2H)
1 Kitbox
1 Keyless chuck + chuck adaptor
(DW004K2C/DW005K2C/DW005K2H)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
which may have occurred during transport.
• Take the time to thoroughly read and understand
this manual prior to operation.
Description (fig. A)
Your cordless rotary hammer drill DW004 has been
designed for professional drilling, hammer drilling
and screwdriving applications.
Your cordless rotary hammer drill DW005 has been
designed for professional drilling, hammer drilling
and screwdriving applications as well as for light
chipping, chiselling and light demolition purposes.
1 Variable speed switch
2 Forward/reverse slider
3 Mode selector
4 Side handle