Gneral Description; Preface And Intended Use - Abus FURM30000 Mode D'emploi

B. General description
The Privest FURM30000 wireless smoke alarm / heat detector from ABUS Security-Center GmbH & Co.
KG combines advanced technology with a compact, streamlined design, making it the perfect choice for
house owners who want the highest safety standards.
Smoke is detected by an advanced photoelectric chamber while the temperature is monitored by means of
two separate thermosensors, which measure the rate of temperature increase as well as the absolute
temperature. With the choice of either smoke or heat detection, or the combination of both, the smoke /
heat detector makes for a highly sensitive and reliable product for the early warning of fire hazards under
various environmental conditions with a reduced risk for false alarms.
The Privest wireless smoke alarm / heat detector fulfils standard EN14604:2005/AC:2008, is easy to install
and is also compatible with the Privest control panels.
1.

Preface and intended use

Dear customer,
Thank you for purchasing the FURM30000 wireless smoke alarm / heat detector. This device is built with
state-of-the-art technology.
These instructions contain important installation and operation information. Follow the directions and
instructions in this manual to ensure safe operation. Store these instructions in a safe place for future
reference. These instructions are part of the device. If you pass the device on to third parties, remember to
include these instructions with the device.
The Privest wireless smoke alarm / heat detector was designed to operate together with 868 MHz ABUS
narrow band receivers. The device contains an integrated transmitter.
The wireless smoke alarm / heat detector does not conform to EN54 or to other local standards required
by law for fire detection systems which contact the fire service automatically.
- 22 -
EN