Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
Page 1 of 9
RAP0011
FITTING INSTRUCTIONS FOR RAP0011BK REAR INDICATOR ADAPTORS
FOR KAWASAKI NINJA 1000SX 2020-
FOR AFTERMARKET M8 INDICATORS
T
.
HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE
S
.
OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY
D
.
O NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT
P
.
LEASE READ ALL INSTRUCTIONS BEFORE PROCEEDING
IF IN ANY DOUBT WHEN FITTING OUR PRODUCTS, CONSULT ONE OF OUR DEALERS
OR HAVE FITTED BY A QUALIFIED TECHNICIAN.
P
LEASE NOTE THAT THE WAY THE KIT IS PACKED DOES NOT NECESSARILY REPRESENT THE WAY OF
.
MOUNTING TO THE BIKE
I
,
N THE EVENT OF RUBBER WASHERS BEING USED TO HOLD COMPONENTS ONTO BOLTS
.
THESE RUBBER WASHERS CAN BE THROWN AWAY
DIGITAL COPIES OF THESE INSTRUCTIONS ARE AVAILABLE FROM:
WWW.RG-RACING.COM
R&G
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
www.rg-racing.com
Email:
info@rg-racing.com
Publicité
Table des Matières
Manuels Connexes pour R&G RAP0011BK
Sommaire des Matières pour R&G RAP0011BK
- Page 1 Page 1 of 9 RAP0011 FITTING INSTRUCTIONS FOR RAP0011BK REAR INDICATOR ADAPTORS FOR KAWASAKI NINJA 1000SX 2020- FOR AFTERMARKET M8 INDICATORS HIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED OVER PAGE OME PARTS MAY BE SHOWN FOR CLARITY OF INSTRUCTIONS ONLY...
-
Page 2: Tools Required
Page 2 of 9 RAP0011 TOOLS REQUIRED GENERAL TORQUE SETTINGS • M4 BOLT = 8Nm Set of metric Allen keys to include 3, 4, 5 & 6mm A/F size. M5 BOLT = • 8, 10 and 12mm spanners or sockets and M6 BOLT = wrench. - Page 3 Page 3 of 9 RAP0011 PICTURE PICTURE PICTURE 3 PICTURE 4 PICTURE 5 PICTURE 6 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
- Page 4 Page 4 of 9 RAP0011 PICTURE 7 PICTURE 8 PICTURE 9 PICTURE 10 R&G Unit 1, Shelley’s Lane, East Worldham, Alton, Hampshire, GU34 3AQ Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301 www.rg-racing.com Email: info@rg-racing.com...
-
Page 5: Fitting Instructions
Page 5 of 9 RAP0011 PICTURE 11 PICTURE 12 PICTURE 13 PICTURE 14 PICTURE 15 PICTURE 16 FITTING INSTRUCTIONS • Remove the panniers, rider and pillion seats. • Remove the two bolts arrowed in picture 1. • Remove the two bolts arrowed in pictures 2 and 3, the remove both pannier mounting brackets. - Page 6 Page 6 of 9 RAP0011 • Carefully remove the wiring taking note of its routing. • Carefully remove the original licence plate bracket while feeding all the wires through the holes in the under-tray. To Remove original indicators • Remove the two bolts arrowed in picture 12 and remove the licence plate bolt bracket. •...
- Page 7 Page 7 of 9 RAP0011 NOTICE DE MONTAGE POUR RAP0011BK ADAPTATEURS CLIGNOTANTS ARRIÈRE POUR KAWASAKI NINJA 1000SX 2020- POUR CLIGNOTANT M8 NON D’ORIGINE E KIT CONTIENT LES ARTICLES ILLUSTRES ET ETIQUETES SUR LA PAGE ERTAINES PARTIES PEUVENT ETRE PRESENTES UNIQUEMENT POUR LA CLARTE DES INSTRUCTIONS...
-
Page 8: Outils Requis
Page 8 of 9 RAP0011 OUTILS REQUIS ALEURS DE SERRAGE MAXIMALES • Clés Allen 3, 4, 5 & 6mm. M4 BOULON = 8Nm • Clé à cliquet + douilles 8, 10 et 12mm. M5 BOULON = 12Nm M6 BOULON = 15Nm •... - Page 9 Page 9 of 9 RAP0011 NOTICE DE MONTAGE • Retirez les sacoches, les sièges conducteur et passager. • Retirez les deux boulons fléchés sur la photo 1. • Retirez les deux boulons fléchés sur les photos 2 et 3, puis retirez les deux supports de montage de la sacoche.