Music Player - Teac AG-H600NT Mode D'emploi

Music Player

Cannot connect to the LAN.
e Connect the wireless LAN antenna properly to the unit.
e Check if your computer can connect to the Internet using the
same network.
e Enter a correct password to the network.
e Check the settings of your network's firewall. The unit needs
access to the following UDP and TCP ports as a minimum: 80,
554, 1755, 5000 and 7070.
e Check if the computer is not shut down or in the sleep mode.
Set up the computer not to shut down or turn into the sleep
mode automatically.
e There may be a problem with the network authentication. Press
the SOURCE button or BAND button to select the Music Player
again.
Cannot find a track. (Shared Media)
e Add the track to the media library of Windows Media Player.
e Set your AG-H600NT as a "Unknown Device" in the device list of
Windows. (page 25)
e Select "Allow" for AG-H600NT ("Unknown Device") (page 25).
e Check the file format. Playable formats are MP3 and WMA.
e If you have antivirus security software enabled on your
computer, the unit may fail to connect.
Cannot find a folder/file. (Shared Folders)
e Configure the folder/file sharing setting. (page 26 to 27)
e Add the file to the shared folder.
e Enter a correct password of the user account.
e Check the file format. Playable formats are MP3 and WMA.
e If you have antivirus security software enabled on your
computer, the unit may fail to connect.
If normal operation cannot be recovered, unplug the power
cord from the outlet and plug it again.
32
Troubleshooting (2)
To reset your unit to the factory default
If your unit is not working properly, it might help to reset it to the
factory default.
This will clear your network settings (including pass keys) and other
user settings (preset stations etc.).
1. If the unit is on, press the STANDBY/ON button to turn the unit to
standby.
2. Hold down the VOLUME/SET knob until the unit turns on.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or
use diluted neutral cleaning liquid. Be sure to remove any fluid
completely. Do not use thinner, benzine or alcohol as they may
damage the surface of the unit.