Teac AG-H600NT Mode D'emploi page 27

Preparations for Shared Folders
(Mac OSX 10.2.1 to 10.4.11)
Check the user account name and its password.
1
To access the computer from AG-H600NT, you need the user
account name and the password of the computer.
2 In "System Preferences", open "Sharing".
3 Activate "Personal File Sharing" and "Windows Sharing".
4 Open "Directory access" in the "Utitlities" folder in
"Applications", and check that the following items are
enabled in the "Services" tab.
< AppleTalk
< LDAPv3
< SLP
< SMB/CIFS
5 Select "SMB/CIFS", and click on "Configure...", and select
an appropriate workgroup.
Preparations for Shared Folders
(Mac OSX 10.5.0 or higher)
Check the user account name and its password.
1
To access the computer from AG-H600NT, you need the user
account name and the password of the computer.
2 In "System Preferences", open "Sharing".
Enable "File Sharing", and then select "Read Only" for
3
"Everyone" in "Users" window. Then Click "Options...".
Activate "Share files and folders using AFP" and "Share
4
files and folders using SMB". In the same window, activate
"On" for the account you want to use for file sharing.
Preparation on the unit for Shared Folders
(both Windows and Macintosh)
Connect your AG-H600NT to the LAN. (page 8)
1
< If you have a problem connecting to the LAN, see page 23.
Enter the user name and the password required to access
2
the computer.
Enter the user name and the password following the menu as
follows:
Setup w System setup w Internet setup w PC Setup w User
Name / Password
For the procedure of playback, see "Listening to Music Player
(Shared Folders)". (page 30)
27