Internet Radio Initial Setup - Teac AG-H600NT Mode D'emploi

Initial setup
When you use the Internet radio function for the first time, the unit
starts an initial setup procedure to connect to the Internet.
1
Select Internet Radio by pressing the SOURCE button
1
repeatedly.
< You can also use the BAND button on the remote control unit.
Initial setup wizard starts.
Select your country/area.
2
Turn the MULTI JOG/ENTER knob to select the item, and then
press the MULTI JOG/ENTER knob.
Most of Europe
USA
3 Select a network name you want to use.
Turn the MULTI JOG/ENTER knob to select the item, and then
press the MULTI JOG/ENTER knob.
005AD904JM2
[Wired]
< To use a wired Internet connection, select "[Wired]".

Internet Radio Initial Setup

2 3
T
T
4 Enter the correct password for the network if required.
< See "How to input characters" below.
Now the unit starts to connect to the Internet.
When connection is established successfully, the Internet radio
menu is displayed. See page 20 to select a station.
< If you have a problem connecting to the Internet, see page 23.
How to input characters
< You can input characters only from the remote control unit.
ENTER
Key:Ge
0123456789
1. Press the skip/scroll buttons (.°//‡) to select a set
of characters.
2. Press the search buttons (m/,) to select the character
you want to input.
3. Press the ENTER button to input the selected letter.
Repeat steps 1 to 3 to input next characters.
<: Deletes the last character.
E: Enters your input.
C: Cancels the operation and goes back to the previous screen.
Characters you can input
0123456789
ABCDEFGHIJKLMNOPQRSTUVWXYZ
abcdefghijklmnopqrstuvwxyz
(space)!"#$%&'()*+,-./:;<=>?@[\]^_`{|}~
/Ò
ڰ/Ƈ
<
EC
19