Chapter 3 - Using The Appliance; Prior To Use; Thermostat - Gamko E3 Mode D'emploi

Chapter 3 - Using the appliance

Prior to use

• Clean the cabinet prior to use. For further details see chapter 4: maintenance.
• Leave the bottle cooler to stand for at least 2 hours before switching on the cabinet.
• Plug into a grounded power socket.

Thermostat

Light on/off
Manual defrost
Set button
Using the thermostat
Icon Description
Press to display the setpoint value and the actual setpoint value.
To switch the light on and off.
Hold for 3 seconds to reset the saved energy reduction pattern.
Press for more than 3 seconds to start defrosting.
(Up) Scroll through the parameter codes in settings or it increases the display value.
(Down) Scroll through settings in parameter codes or it lowers the display value.
ECO and On / Off press to activate or deactivate the energy-saving mode function. Hold
for 3 seconds to switch the device on and off.
30
EMERGENCY STOP
ISOLATE FROM THE POWER SUPPLY
Up/down button
settings
Eco
On/off
E3