Chapter 4 - Maintenance; Cleaning The Cabinet - Gamko E3 Mode D'emploi

Chapter 4 - Maintenance

Cleaning the cabinet

Self-maintenance
• Before first use the cabinet should be cleaned using water and a mild detergent.
• Do not use acids or aggressive cleaning agents. Use water and a mild detergent when cleaning the unit.
• Intensive use requires regular cleaning.
• Check and clean the magnetic seals (gaskets) on a regular basis. If the seal is not airtight it will have a
negative effect on the refrigeration performance, and it need to be replaced immediately.
Attention!
•
•
•
E3
Switch the device off before you start cleaning the device!
Do not dismantle any fixed components when cleaning the machine unit!
Do not use aggressive abrasives or detergents!
33