Ec Declaration Of Conformity - Husqvarna K 770 Vac Manuel D'utilisation

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE–561 82 Huskvarna, Sweden, tel:
+46–36–146500, declares under sole responsibility that
the portable cut-off machine Husqvarna K 770 Vac,
dating from 2018 serial numbers and onward (the year is
clearly stated on the type plate, followed by the serial
number), comply with the requirements of the
COUNCIL'S DIRECTIVE:
• of May 17, 2006 "relating to machinery"
2006/42/EC.
• of May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC. Conformity assessment
according to annex V.
For information relating to noise emissions, see
Technical data on page 29 .
The following standards have been applied: EN ISO
12100:2010, EN ISO 19432:2012.
RISE SMP Svensk Maskinprovning AB, Box 7035,
SE-750 07 Uppsala, Sweden, has performed voluntary
type examination in accordance with the machinery
directive (2006/42/EC) on behalf of Husqvarna AB. The
certificate has the number: SEC/10/2285.
Notified body, RISE SMP Svensk Maskinprovning AB,
Box 7035, SE-750 07 Uppsala, Sweden, has certified
conformity with annex V of the Council's Directive of
May 8, 2000 "relating to the noise emissions in the
environment" 2000/14/EC. The certificate has the
number: 01/170/037
Partille, October 15, 2018
Edward Gulis
Global R&D Director
Construction Equipment Husqvarna
(Authorized representative for Husqvarna AB and
responsible for technical documentation.)
705 - 002 - 12.11.2018
EC Declaration of Conformity
31