VALBERG CNF 268 F WD B625C2 Consignes D'utilisation page 15

B
Using the appliance
Remove the rod from the upper hinge, position on the other side and tighten firmly.
Lift off the lower door and position it on a surface which will not cause damage.
Loosen the screw attaching the door stop and install on the left side.
Note: When you remove the door, make sure that the washer located between the central hinge
and the bottom of the freezer door does not get lost.
Loosen the screws attaching the central hinge and remove the central hinge holding the lower
door in place.
Central hinge
Screw attaching the
central hinge
Lift off the lower door and position it on a surface which will not cause damage, then replace
the hinge cover on the other side.
-
Remove the screw covers from the left central hinge and place them over the uncovered holes
on the right side.
Screw cover
Screw cover
Screw cover
Screw cover
Lay the refrigerator on a foam support or similar material in order to prevent the cooling circuit
at the back of the refrigerator from being damaged.
8 EN