Recalibration; Dismounting - WIKA CPT62I0 Mode D'emploi

7. Maintenance, cleaning ... / 8. Dismounting, return ...
3. Clean the instrument with a moist cloth. Electrical connections must not come into
contact with moisture!
CAUTION!
EN
Damage to the instrument
Improper cleaning may lead to damage to the instrument!
▶
▶
▶
4. Wash or clean the dismounted instrument, in order to protect persons and the
environment from exposure to residual media.

7.3 Recalibration

DKD/DAkkS certificate - official certificates:
We recommend that the instrument is regularly recalibrated by the manufacturer, with
time intervals of approx. 12 months.
8. Dismounting, return and disposal
Personnel: Skilled personnel
Protective equipment: Protective gloves and safety goggles
Tools: Spanner or torque spanner
WARNING!
Physical injuries and damage to property and the environment
through residual media
Residual media at the dismounted instrument can result in a risk to persons,
the environment and equipment.
▶
▶
▶
16
Do not use any aggressive cleaning agents.
Do not use any hard or pointed objects for cleaning.
Do not use solvents or abrasives for cleaning.
Observe the information in the material safety data sheet for the
corresponding medium.
Wear the requisite protective equipment.
Wash or clean the dismounted instrument, in order to protect persons and
the environment from exposure to residual media.
WIKA operating instructions, reference pressure sensor, model CPT62I0