HanseLifter SDJ Serie Mode D'emploi page 43

Table of figures
Figure 1 Operating lever at the drawbar..............11
Figure 2 Valve seat..............................................11
Figure 3 Drawbar SDJ series ..............................14
Figure 4 Fork SDJ series .....................................14
Figure 5 Frame SDJ1012 / SDJ1016 ..................15
Figure 6 Frame SDJ1025 / SDJ1030 ..................16
Figure 7 Hydraulic unit SDJ1012/1016................17
Figure 8 Hydraulic unit SDJ1025 .........................18
Figure 9 Hydraulic unit SDJ1030 .........................19
Figure 10 Mast SDJ1025 / SDJ1030 ...................20
Disposal
•
Ensure adherence to the local laws, regulations, norms and procedures for waste disposal.
•
Separate containers must be available for hazardous materials, metal, electronic scrap and mixed
waste. Waste must be sorted on site.
Caution
Hazardous materials must be disposed under the supervision of an expert. Never do it on your own. Can in a
specialized and authorized disposal company.
•
Different types of oil must be collected and stored in separate containers. Do not mix different oil types
and hazardous substances.
•
Handling and storage of waste and hazardous materials must be done in compliance with the local
rules and regulations.
FAQ
If you have any questions, please contact the dealer where you bought the device. The employees will be
pleased to help you.
SDJ10 - Series Duplication, even in parts, is not permissible.
List of tables
Table 1 Technical data.........................................10
Table 2 Troubleshooting ......................................12
Table 3 Tightening torques ..................................13
Page 21 of 22