General Use; Intended Use; Table 1 Technical Data - HanseLifter SDJ Serie Mode D'emploi

Table des Matières

Technical data

Manufacturer (abbreviation)

1.1

1.2

Manufacturers type designation

1.4

Operator type: hand, pedestrian, standing, seated, order-picker

1.5

Load capacity/rated load

1.6

Load centre distance

1.8

Load distance, centre of drive axle to fork

1.9

Wheelbase

2.1

Service Weight

Tyres: solid rubber, superelastic, pneumatic, polyurethane

3.1

Tyre size, front

3.2

Tyre size, rear

3.3

Wheels, number front rear (x = driven wheels)

3.5

Tread, front

3.6

Tread, rear

3.7

4.2

Height, mast lowered

4.3

Free lift

4.4

Lift

4.5

Height, mast extended

4.9

Height of tiller in drive position min./max.

4.15

Height, lowered

Overall length

4.19

Length to face of forks

4.20

Overall width

4.21

Fork dimensions

4.22

Fork-carriage width

4.24

Distance between fork arms

4.25

Ground clearance, laden, below mast

4.31

4.32

Ground clearance, centre of wheelbase

4.35

Turning radius

5.2

Lift speed, laden/unladen

5.10

Service brake

General use

The high-lift truck of the SDJ series is designed to transport and lift loads. Loads may be transported over short

distances and loads may be lifted up to the model-specific lifting height for storing in and removing from

shelves. The high-lift truck of the SDJ series is a platform floor truck that can be used in a versatile and reliable

manner.

Please always observe the load graph attached to the platform floor truck.

Intended use

Please use the platform floor truck only to transport goods respectively loads. The platform floor truck must only

be used in dry rooms with flat floors. Keep the platform floor truck away from moisture and wet conditions. If the

device made contact with rain for example, dry the platform floor truck immediately and grease all moving parts

at the designated grease nipples. Furthermore any contact with dust, sand, or other abrasive and aggressive

materials should be avoided. Please ensure that no belts or ropes get caught in the wheels.

Keep the platform floor truck away from aggressive and dirty environments.

When working, please observe that the floor has sufficient load-carrying ability.

SDJ10 – Series

Q (t)

c (mm)

x (mm)

y (mm)

(mm)

s/e/l (mm)

(mm)

WA (mm)

Table 1 Technical data

Duplication, even in parts, is not permissible.

HanseLifter

SDJ1012

SDJ1016

SDJ1025

Hand

1.0

600

500

730

1280

200

230

276

polyurethane

150x40

83x60

2/4

620

700

385

1730

1980

1850

1085

1440

330

1110

1510

2410

1750

2080

3000

500-1100

1705

555

755

860

55/170/1150

565

550

1400

manual

HanseLifter

1.1

SDJ1030

1.2