Operating - DeWalt DXV30SAPTA Traduction De La Notice D'instructions Originale

English
PROBLEM
Check power cord, plugs and outlet.
Motor does not run
Ensure the on/off switch is in the
ON position ( I )
Remove blockages in the oor
nozzle, extension wands, hose
or lter.
Replace the disposable dust bag.
Suction capacity
Check for proper installation of
decreases
the lter.
Clean or replace the lter.
Empty dust tank, refer to
THE TANK
INSTRUCTIONS.
Thermal overload has been tripped:
1. Turn the vacuum off and
disconnect vacuum cleaner from
power source.
2. Empty the dust tank, if needed.
Vacuum stops
3. Allow the unit to cool.
running
4. Plug the power cord into an
appropriate outlet and turn on/off
switch to the ON position ( I ) to
test.
Check for proper installation of the
lters.
Ensure lters are not damaged;
Dust comes out
replace if necessary.
while vacuuming
Ensure lter seals are in place and
are secure.
Check the t of the vacuum head.
If the supply cord is damaged, it must
WARNING:
be replaced by the manufacturer, its service agent or
similarly quali ed persons in order to avoid a hazard.
TOOL GUARANTEE
3
YEAR
LIMITED
GUARANTEE
SOLUTION
EMPTY

OPERATING

under
21