Thermostat Installation - Hitachi ATW-RTU-05 Manuel D'installation Et De Fonctionnement

INSTALLATION INSTRUcTIONS

1.5 THERMOSTAT INSTALLATION

1 Locate the thermostat.
• Away from draughts
• Away from heat sources
• Away from direct sunlight
• Positioned about 1.2m – 1.5m from the floor
Do not place
in the sunlight
Avoid
air currents
2 First remove the dial.
3 Unclip the mounting plate.
Press the top of the thermostat downwards, pull it loose and
tilt forwards.
3 PMML0411A rev.1 - 04/2016
Do not place
above a heat source
1.5 m
4 Mount directly to the wall.
The plugs and mounting screws required are supplied.
Screws
5 Remove the protective tab between the batteries.
6 Attach the thermostat to the mounting plate.
7 Replace the dial.
Plugs