Electric Connection - Beko HCA62320W Mode D'emploi

Installing your appliance
4
Fig. 8 Positioning the hood.
Fig. 9 Hood cover assembly.

4.2 Electric connection

The mains voltage must correspond to the voltage
indicated on the rating plate affixed to the inside
of the hood. If the kitchen hood is equipped with
a plug, it should be put in a socket connector that
meets the requirements of binding regulations
and is located in an easily accessible place. If the
hood is not fitted with a plug, the installation of
the hood should be entrusted to someone with
appropriate permissions (e.g. electrician).
16 / EN
B
A
Be extremely careful when parting chimney cover
2 x O5 x 45mm
2 x O3,9x9,5
B
A
Hood / User Manual