Introduction; Applicable Model; Accessories - Toshiba TEC B-450-QP Série Mode D'emploi

1. INTRODUCTION

1. INTRODUCTION
Thank you for choosing the TEC B-450 Series thermal/transfer printer. This new generation high
performance high quality printer is equipped with the latest hardware including the newly developed high
density (11.8 dot/mm, 300 dot/inch) print head. This allows very clear print at a maximum speed of 101.6
mm/sec. (4 inch/sec.). Other standard features include an external paper supply.
Optional features include a strip mechanism and cutter mechanism.
This manual contains general set-up and maintenance information and should be read carefully to help
gain maximum performance and life from your printer. For most queries please refer to this manual and
keep it safe for future reference.

1.1 APPLICABLE MODEL

• B-452-TS12-QP
• B-452-TS12-QP-PAC
Model name description
B - 4 5 2 - T S 1 2 - Q P - P A C

1.2 ACCESSORIES

Owner's Manual
(EO1-33005)
Supply Holder
Spacer
Destination Code
QP: European Version
Specification
10: without Centronics interface and expansion memory
12: with Centronics interface and expansion memory
Issue mode
S: Batch
Resolution
T: 11.8 dots/mm (300 dpi)
Thermal direct/Thermal transfer
Power Cord
Supply Holder Unit
Special Code
PAC: with a start up kit
No description: without a start up kit
The PAC model also includes the following
accessories.
CD-ROM
Label
E1-1
ENGLISH VERSION EO1-33005
1.1 APPLICABLE MODEL
Parallel Interface Cable
Ribbon