Manual Settings - SOUNDMASTER FUR100 Mode D'emploi

ENVIRONMENTAL RECEPTION EFFECTS
Your radio controlled clock obtains the accurate time with wireless technology. Same as
all wireless devices, the receiving ability maybe affected by, but not limited to, the following
circumstances:
•
Long transmitting distance
•
Nearby mountains and valleys
•
Among tall buildings
•
Near railway, high voltage cable etc.
•
Near freeway, airport, etc.
•
Near construction site
Place your clock at a location with optimal signal, i.e. close to a window and away from metal
surface or electrical appliances.
CLOCK (DCF SIGNAL RECEPTION AND SIGNAL INDICATOR)
After your clock is powered up, it starts to receive DCF signal. The
Receiving DCF signal
Successful Reception
Failed Reception
AUTOMATIC RECEPTION
Your clock starts automatic reception every day at 1:00, 2:00, and 3:00. If it fails to receive the
DCF time signal at 3:00, it will start reception at 4:00. If it fails again, it will start reception at
5:00. If it fails again, it will start automatic reception at 1:00 again in the next day.
MANUAL RECEPTION
Simply press and hold the
hold the / WAVE button to stop DCF reception.
When your weather station is receiving the radio controlled time signal, the display will turn
dimmer. It will resume to the brightness level which you originally selected after the radio
controlled time reception is completed.
During RCC reception, all buttons do not function and it does not take temperature
measurement.
Remark: turning on the FM radio during the DCF reception will affect the result of DCF time
reception. It is recommended to temporarily turn off the FM radio (by one press the
the clock radio is receiving the DCF time.

MANUAL SETTINGS

1. Press and hold "SET", 00 flash, press
"00" = GMT +1 hour (e.g. Germany)
"01" = GMT +2 hours (e.g. Finland)
"-01" = GMT 00 hour (e.g. U.K.)
2. Press "SET" again, hour digits flash. Press
accelerate setting at fast speed.
3. Press "SET" again, the minute digits flash. Press
to accelerate setting at fast speed.
4. Press "SET" again, the display shows "24Hr" flash. Press
12Hr mode, P (PM) will appear on the display to indicate afternoon time. There is no AM
indicator.
icon flashing
icon becomes static
icon disappear
/ WAVE button. Your clock will start manual reception. Press and
/
3
FUR100 / English Instruction Manual
• Inside concrete buildings
• Near electrical appliances
• Near computer and TV´s
• Inside moving vehicles
• Near metallic structures
to set the time zone: -01 or 00 or 01.
/ to set hours. Press and hold
/ to set minutes. Press and hold
/
icon flashes.
/ to
to select 12Hr 24Hr. In

) when
/