Vente Unique Vogue Spa Installation Et Mode D'emploi page 36

Adjusting Filtration
Main Filtration
Filter cycles are set using a start time and a duration. Start time is indicated by an "A" or "P" in the bottom right corner of the display. Dura-
tion has no "A" or "P" indication. Each setting can be adjusted in 15-minute increments. The panel calculates the end time and displays it
automatically.
Sub-Menu Detail – Set Filter Cycle 1
Main Screen
Press Menu/Select
repeatedly until FLTR 1
appears in the LCD.
To next item in
Main Menu
Filter Cycle 2 - Optional Filtration
Filter Cycle 2 is OFF by default.
It is possible to overlap Filter Cycle 1 and Filter Cycle 2,
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815,
7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. Allmaterial copyright
of Balboa Water Group.
Shows/flashes start time
to show RUN HRS
to show F1 ENDS xx:xx
To Set
To Set
Shows/flashes start time
to show RUN HRS
to show F2 ENDS xx:xx
To Set
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Menu/Select button
Waiting time that keeps the last change to a menu item.
*****
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
Sets start hour Shows/flashes minutes
Sets Filter 1 length in hours Shows/flashes minutes
To Set
*****
Waiting a few seconds
will lose any new Filter 1
Start Time and Run Hours and
revert to the previous Filter 1 settings.
Main Screen
Waiting
a few seconds
reverts to original setting
*****
To Set
Sets start hour Shows/flashes minutes
Sets Filter 1 length in hours Shows/flashes minutes
To Set
*****
Waiting a few seconds
will lose any new Filter 2 On/OFF,
Start Time and Run Hours and
revert to any previous Filter 2 settings.
Purge Cycles
In order to maintain sanitary conditions, secondary Pumps and/or a
If Filter Cycle 1 is set for 24 hours, enabling Filter Cycle 2 will initiate a
purge when Filter Cycle 2 is programmed to begin.
Sets 15-minute increments
Waiting
a few seconds
reverts to original setting
*****
Sets 15-minute increments
Wait to
Revert
*****
2X
Main Screen
Sets 15-minute increments Waiting
a few seconds
reverts to original setting
*****
Sets 15-minute increments
Wait to
Revert
*****
2X
Main Screen
35