Vente Unique Vogue Spa Installation Et Mode D'emploi page 31

Temperature and Temp Range
Adjusting the Set Temperature
will heat to the new set temperature when required.
Press-and-Hold
released. If only one temperature button is available and the limit of the Temperature Range is reached when the button is being held, the
progression will reverse direction.
Dual Temperature Ranges
This system incorporates two temperature range settings with independent set temperatures. The High Range designated in the display by
a thermometer and an "up" arrow, and the Low Range designated in the display by a thermometer and "down" arrow.
These ranges can be used for various reasons, with a common use being a "ready to use" setting vs. a "vacation" setting. The Ranges
are chosen using the menu structure below. Each range maintains its own set temperature as programmed by the user. This way, when a
range is chosen, the spa will heat to the set temperature associated with that range.
For example:
High Range might be set between 80°F and 104°F.
Low Range might be set between 50°F and 99°F.
Freeze Protection is active in either range.
See Ready and Rest on Page 6
for additional heating control information.
Sub-Menu Detail – Set Temperature and Water Temperature Ranges
Main Screen
Set Temp will Show & Flash
High-Range vs.
Low-Range Temp Choice
Toggle the Range arrows in the LCD.
To next item in Main Menu
Main Screen
Set Temp will Show & Flash
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815,
7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. Allmaterial copyright
of Balboa Water Group.
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Main Screen
To Set
*****
Waiting a few
seconds reverts to
original settings
Press a Temp Button repeatedly to change the temperature.
Pressing and holding a Temp Button will also change the temperature.
Key
Indicates Flashing or Changing Segment
Indicates Alternating or Progressive Message - every 1/2 second
A temperature button, used for "Action"
Menu/Select button
Waiting time that keeps the last change to a menu item.
*****
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
Main Screen
OR
a few seconds
Main Screen
OR
a few seconds
30