Power Cord Connection - Pioneer PDP-504CMX Mode D'emploi

Installation and Connections

Power cord connection

Connect the power cord after all component connections
have been completed.
1
Connect the power cord to this unit.
2
Plug the power cord into a power outlet.
CAUTION
÷ Use only the power cord provided.
÷ For the plasma display, a three-core power cord with a ground
terminal is used for efficiency protection.
Always be sure to connect the power cord to a three-pronged
grounded outlet and make sure that the cord is properly
grounded. If you use a power source converter plug, use an
outlet with a ground terminal and screw down the ground line.
NO!
Do not use a power supply voltage other than that indicated (AC
100 - 120 V, 50/60 Hz) as this may cause fire or electric shock.
14
En