Hitachi RAK-18PPB Mode D'emploi page 8

PREPARATION BEFORE OPERATION
NOTE
Note on setting the calendar and clock.
If the calendar and clock are not set, the ON-timer, OFF-timer and Weekly Timer cannot be set.
●
If the calendar and clock are not set correctly, the ON-timer, OFF-timer and Weekly Timer will not
●
operate correctly.
When the ON-timer, OFF-timer and Weekly Timer are set, the calendar and clock cannot be changed.
●
If there is a need to change the calendar and clock, ON-timer, OFF-timer and Weekly Timer need to
be cancelled.
All manuals and user guides at all-guides.com
■ To set calendar and clock
1. Press
"Year" blinks.
2. Press
3. Press
blink.
4. Press
month.
5. Press
6. Press
time.
7. Press
Calendar and clock are set.
To modify the calendar and clock, press
button.
Then follow steps 1 to 7.
Calendar and clock need to be set again after changing
batteries.
After changing the batteries,
1. Press
2. Direct remote controller towards indoor unit and press
3. The calendar and clock from indoor unit will be transmitted.
■ Calendar and clock will not be transmitted from indoor
unit when the following occurs:
●
●
– 3 –
(RESET) button when rst time setting.
(TIME) button to set the current year.
(CLOCK) button. "Day" and "Month"
(TIME) button to set the current day and
(CLOCK) button. "CLOCK" blinks.
(TIME) button to set the clock to the current
(CLOCK) button.
(RESET) button.
(INFO) button.
When there is a power failure.
When breaker is OFF by user (unit is not in STANDBY
MODE).
(CLOCK)