Hitachi RAK-18PPB Mode D'emploi page 21

CLEAN (ONE TOUCH CLEAN) OPERATION
Drying indoor heat exchanger after cooling operation to prevent mildew.
NOTE
When CLEAN operation nish, unit will switch OFF automatically.
●
If Weekly Timer or Once Timer is set, there is a need to cancel those timer before operating CLEAN
●
function.
For multi connections, when pressing
●
For multi connections, when one room operates CLEAN operation
●
COOLING, DEHUMIDIFYING or FAN operation. However, when other rooms need to operate HEATING
operation, air conditioner will be in STANDBY mode. After CLEAN operation nish, HEATING operation
will start.
All manuals and user guides at all-guides.com
■ To start CLEAN operation
Press
●
Total time taken for One Touch Clean operation is 60 minutes.
During this operation, HEATING or FAN operation shall
1
operate.
During one touch clean, operation lamp is blinking.
" ", "
■ To cancel CLEAN operation
Press
●
Press
●
(CLEAN) button, operation is limited to FAN operation.
– 16 –
(CLEAN) button when unit is OFF.
" is displayed on the LCD.
(START/STOP) button. Or
(CLEAN) button again.
rst, other rooms can operate