Making The Connections; Preparing The Remote Control - Panasonic SC-HC295 Mode D'emploi

Making the connections

Connect the AC power supply cord only after all the
other connections have been made.
1
Connect the FM indoor antenna.
Put the antenna where reception is best.
Adhesive tape
2
Connect the AC power supply cord.
To household
AC outlet
Do not use any other AC power supply cords except
the supplied one.
Conserving power
The system consumes a small amount of power
(Z"Specifications") when it is in standby mode.
Disconnect the power supply if you do not use the
system.
Some settings will be lost after you disconnect the
system. You have to set them again.
Note:
•
These speakers do not have magnetic shielding. Do not put
them near TVs, PCs or other equipment easily influenced
by magnetism.
•
Tape the antenna to a wall with the least amount of
interference.
•
Use an outdoor antenna if reception is poor.
(not supplied)

Preparing the remote control

Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.
5