Sound Effects; Saving The Sound Settings; External Equipment - Panasonic SC-HC295 Mode D'emploi

Sound effects

1
Press [SOUND] repeatedly to select the sound
effect.
2
Press [R, T] to select the setting and then press
[OK].
PRESET EQ "HEAVY", "SOFT", "CLEAR", "VOCAL" or
"FLAT"
BASS –4 to +4
TREBLE –4 to +4
D.BASS "ON D.BASS" or "OFF D.BASS"
SURROUND "ON SURROUND" or "OFF SURROUND"
Note:
The default setting is underlined. Changed settings will be
kept until it is changed again, unless otherwise indicated.

Saving the sound settings

You can save the current sound effects (up to
3 combinations).
Preparation
Select the sound effects.
1
Press [SETUP] to select "SAVE MY SOUND".
2
Press [R, T] to select a sound setting number and
then press [OK].
"SAVED" is shown.
The new setting replaces the one existing in the same
sound setting number.
To recall the setting
1
Press [SOUND] to select "MY SOUND".
2
Press [R, T] to select the sound setting number
and then press [OK].
12

External equipment

You can connect the AUX IN terminal to a portable audio
equipment, PC, etc., to use this system as a speaker for
enhanced sound quality.
Preparation
• Turn off the equalizer (if any) of the portable audio
equipment to prevent sound distortion.
• Decrease the volume of the system and the portable
audio equipment before you connect or disconnect the
portable audio equipment.
Audio cable
(not supplied)
1
Connect the portable audio equipment.
Plug type: Ø 3.5 mm (
2
Press [RADIO/AUX] to select "AUX".
3
Play the portable audio equipment.
To adjust the input level
1
Press [SOUND] repeatedly to select "INPUT LEVEL".
2
Press [R, T] to select "NORMAL" or "HIGH" and
then press [OK].
Note:
•
The default setting is "NORMAL".
•
Select "NORMAL" if the sound is distorted during "HIGH"
input level.
• Read the operating instructions of the portable audio
equipment for details.
•
Components and cables are sold separately.
Portable audio
equipment
(not supplied)
") stereo (not supplied)
1 /
8