Others; Software Update; Maintenance - Panasonic SC-HC295 Mode D'emploi

Others

Auto off
This system automatically turns off when you do not use
it for approximately 20 minutes.
1
Press [SETUP] repeatedly to select "AUTO OFF".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
This function does not work when you are in radio source or
when a Bluetooth device is connected.
®
Bluetooth ® standby
This function automatically turns on the system when you
establish a Bluetooth ® connection from a paired device.
1
Press [SETUP] repeatedly to select
"BLUETOOTH STANDBY".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
Some devices may take longer to respond. If you are
connected to a Bluetooth ® device before turning off the
system, wait for a minimum of 5 seconds before connecting
to this system from your Bluetooth
Charging a portable device
This system can supply power to a portable device, such
as Android™ smartphone, connected to the USB port.
Note:
• Use a cable compatible with the device.
• Use the charger supplied with the device if power is not
supplied to the device.
•
Do not use a cable or connect a device that exceeds the
rated value of 5 V, 1.5 A.
•
Examine the screen of the device to check if charging is
complete. Disconnect the device after charging.
•
Depending on the device, power may not be supplied to it.
•
Read the operating instructions of the device for details.

Software update

Occasionally, Panasonic may release updated software
for this unit that may add or improve the way a feature
operates. These updates are available free of charge. For
more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
█
Checking the software version
1
Press [SETUP] repeatedly to select "SW VER." and
then press [OK].
The software version is shown.
2
Press [OK] again to exit.
® device again.

Maintenance

To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
system.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
13