Sound Effects; Others; Checking The Software Version - Panasonic SC-PM250 Manuel D'utilisation

Sleep timer
The sleep timer switches off the system after the set time.
1
Press [SETUP] to select "SLEEP".
2
Press [R, T] to select the setting (in minutes) and
then press [OK].
To cancel, select "OFF".
Note:
• The remaining time is always shown on the display. The
display changes temporarily when you perform other
operations.
• The sleep timer can be used together with the play timer.
•
The sleep timer always comes first. Be sure not to set an
overlap of timers.

Sound effects

1
Press [SOUND] repeatedly to select the sound
effect.
2
Press [R, T] to select the setting and then press
[OK].
PRESET EQ "HEAVY" (default), "SOFT", "CLEAR",
"VOCAL" or "FLAT"
BASS –4 to +4 (default: 0)
Using the main unit
1. Press [BASS].
2. Press [2/3] or [5/6].
TREBLE –4 to +4 (default: 0)
Using the main unit
1. Press [TREBLE].
2. Press [2/3] or [5/6].
D.BASS "ON D.BASS" (default) or "OFF D.BASS"
SURROUND "ON SURROUND" or
"OFF SURROUND" (default)

Others

Auto off
This system automatically switches off when you do not
use it for 20 minutes.
1
Press [SETUP] repeatedly to select "AUTO OFF".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
This function does not work when you are in radio source or
when a Bluetooth device is connected.
®
Bluetooth ® standby
This function automatically switches on the system when
you establish a Bluetooth ®
device.
1
Press [SETUP] repeatedly to select
"BLUETOOTH STANDBY".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".

Checking the software version

1
Press [SETUP] repeatedly to select "SW VER." and
then press [OK].
The software version is shown.
2
Press [OK] again to exit.
connection from a paired
11