Using Sound Effects; Selecting Sound Effects; Enjoying Surround Sound; Using Other Equipment - Panasonic SC-PM46 Manuel D'utilisation

Using sound effects

Selecting sound effects

Selecting sound effects
You can change the sound effect by selecting Preset EQ or adjusting
the bass or treble effect.
Preset EQ Preset EQ
Press [PRESET EQ] repeatedly to select your desired setting.
HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
EQ-OFF No effect
Bass or treble Bass or treble
Enables you to enjoy the lower or higher pitch sound.
1 Press [BASS/TREBLE] repeatedly to select your desired
setting.
BASS
original display
Setting Effect
BASS For lower pitch sound
TREBLE For higher pitch sound
2 Press [ /4] or [ /¢] to adjust the level.
Note
The tone level can be varied within -4 to +4.

Enjoying surround sound

Enjoying surround sound
Enables you to add natural width and depth to the stereo sound.
To activate
Press [SURROUND] to display "
To cancel
Press [SURROUND] again to clear "
Note
• Surround sound is less discernible when listening through
headphones.
• If interference in FM stereo reception increases, cancel the
surround sound effect.
All manuals and user guides at all-guides.com
TREBLE
" indicator.
" indicator.

Using other equipment

Connecting and playing a USB Connecting and playing a USB
mass storage class device mass storage class device
MP3
The USB connectivity enables you to connect and play MP3 tracks
from USB mass storage class, typically USB memory devices (Bulk
only transfer).
Preparation
Before connecting any USB mass storage device to the unit, ensure
that the data stored therein has been backed up.
It is not recommended to use a USB extension cable. The USB
device is not recognised by this unit.
1 Reduce the volume and connect the USB mass storage
device.
Press [USB 6] to start play.
2
To Action
Press [USB 6].
pause play
Press again to resume play.
Press [CLEAR 7].
stop play
"RESUME" is displayed. The position is
memorized.
Press [USB 6] to resume.
Press [CLEAR 7] again to clear the position.
skip track Press [ /4] or [ /¢].
skip album Press [ALBUM
Press [ALBUM
the numeric buttons in the stop mode.
Display function Display function
Press [DISPLAY] repeatedly during play or pause mode.
Elapsed time Remaining time
ID3 (Artist) ID3 (Track)
For other operating functions, they are similar as those described in
"Discs" (➡ page 7 and 8).
USB enabled device
(not included)
It is not recommended
to use a USB extension
cable. The device
connected via the cable
will not be recognised
by this unit.
or ] in the play mode.
or ] once and then
Album name Track name
ID3 (Album)
11
11