Simple Setup; Making The Connections - Panasonic SC-PM46 Manuel D'utilisation

Simple setup

Making the connections

Making the connections
Connect the AC power supply cord only after all other connections have been made.
Connect the AM loop antenna.
AM loop antenna
Stand the antenna up on its base. Keep the loose antenna cord
away from other wires and cords.
Connect the speaker cables.
Red (ª)
Black (·)
Incorrect connection can damage the unit.
Optional antenna connections Optional antenna connections
FM outdoor antenna
FM outdoor antenna (not included)
• Never use an outdoor antenna during a lightning storm.
• You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
• Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
4
• Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12 m (16 to 40 feet) of vinyl-covered wire horizontally
along a window or other convenient location.
4
All manuals and user guides at all-guides.com
Red (ª)
Black (·)
Connect the AC power supply cord.
The included AC power supply cord is for use with this unit
only. Do not use it with other equipment.
Conserving power
The unit consumes approx. 0.2 W even when it is turned off
with [POWER y/|]. To save power when the unit is not to be
used for a long time, unplug it from the household AC outlet.
Remember to reset the radio stations and any other memory
items before using the unit again.
75  coaxial cable
(not included)
Connect the FM indoor antenna.
Tape the antenna to a wall or column, in a position
with least amount of interference.
AM outdoor antenna
AM outdoor antenna (not included)
(16-40 ft.) (16-40 ft.)
Adhesive
tape
FM indoor
antenna
AM loop antenna
(included)