Specifications - Panasonic SC-HC295 Mode D'emploi

Specifications

█
Amplifier section
RMS output power stereo mode
Front Ch (both ch driven)
10 W per channel (8 Ω), 1 kHz, 10% THD
Total RMS stereo mode power
FTC output power stereo mode
Front Ch (both ch driven)
7 W per channel (8 Ω), 60 Hz to 20 kHz, 1% THD
Total FTC stereo mode power
█
Tuner, terminals section
Preset memory
Frequency modulation (FM)
Frequency range
87.9 MHz to 107.9 MHz (200 kHz step)
87.5 MHz to 108.0 MHz (100 kHz step)
Antenna terminals
AUX input
Terminal
█
Disc section
Disc played [8 cm (3") or 12 cm (5")]
Pick up
Wavelength
█
USB section
USB port
USB standard
Media file format support
USB device file system
16
FM 30 stations
75 Ω (unbalanced)
Stereo, 3.5 mm ( 1 /
8
CD, CD-R/RW (CD-DA, MP3
790 nm (CD)
DC OUT 5 V, 1.5 A
USB 2.0 full speed
MP3 (*.mp3)
FAT12, FAT16, FAT32
█
Bluetooth
Version
Class
Supported profiles
20 W
Operating frequency
Operation distance
█
Speaker section
14 W
Speaker unit(s)
Full range
Impedance
█
General
Power supply
Power consumption
Dimensions (W x H x D)
") jack
Mass (Weight)
Operating temperature range
Operating humidity range
1 )
Power consumption in standby mode
Power consumption in standby mode
(With "BLUETOOTH STANDBY" set to "ON")
Note:
•
Specifications are subject to change without notice.
Mass (Weight) and dimensions are approximate.
•
Total harmonic distortion is measured by the digital
spectrum analyzer.
1 MPEG-1 Layer 3, MPEG-2 Layer 3
2
Power consumption in standby mode is measured with
USB device disconnected from the unit before turning to
standby mode.
section
®
Bluetooth
2.4 GHz band, FH-SS
10 m (33 ft) line of sight
") cone type x 1 per channel
8 cm (3 /
1
8
400 mm x 197 mm x 107 mm
(15 3 /
0°C to +40°C (+32°F to +104°F)
35% to 80% RH (no condensation)
0.15 W (approximate)
0.25 W (approximate)
® Ver. 2.1 + EDR
Class 2
A2DP, AVRCP
8 Ω
AC 120 V, 60 Hz
22 W
" x 7 " x 4 ")
3 / 7 /
4 4 32
1.9 kg (4.2 lbs)
2
2