Getting Started; Step 1 - Making The Connections - Panasonic SC-PM21 Mode D'emploi

Getting started

Step 1 1 Step
- Making the connections - Making the connections
Connect the AC power supply cord only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the speaker cords.
OR
If the speaker cords do not have vinyl tips, directly connect them to the terminals.
1
Connect the FM indoor antenna.
Adhesive
tape
FM indoor
antenna
Tape the antenna to a wall or column, in a position with
least amount of interference.
3
Connect the speaker cables.
White
Blue
Grey (+)
Blue (–)
Cords with white and blue tags are for high frequency.
Cords with red and black tags are for low frequency.
Incorrect connection can damage the unit.
Optional antenna connections Optional antenna connections
FM outdoor antenna
FM outdoor antenna
(not included)
75 Ω
coaxial cable
(not included)
• Never use an outdoor antenna during a lightning storm.
• You can connect the FM outdoor antenna for better reception. Please consult your dealer for installation.
• Disconnect the FM indoor antenna if an FM outdoor antenna is installed.
4
• Connect the AM outdoor antenna without removing the AM loop antenna. Run 5 to 12m vinyl-covered wire horizontally along
RQT7968 a window or other convenient location.
Red
Black
Black (–)
Red (+)
AM outdoor antenna
2
Connect the AM loop antenna.
AM loop antenna
Stand the antenna up on its base. Keep loose antenna
cord away from other wires and cords.
4
Connect the AC power supply cord.
• The included AC power supply cord is for use with
this unit only. Do not use it with other equipment.
AM outdoor antenna
(not included)
AM loop antenna
(included)
To household
mains socket