10.Technical data
Measurement
Display of process information (e.g. measured value
principle
and alarm condition), for the field bus user (e.g.
sensor or actuator) connected to the PROFIBUS-PA
network. Process value is displayed as a 7 digit
number, process condition is displayed using set
point markers.
System construction
Microcontrolled front end display with PROFIBUS-PA
interface and LC display
Block diagram
Protocol
PROFIBUS-PA in accordance to EN 50170 Volume
2,
transmission to IEC 1158-2
Data
5 Byte, input or output data
(process value and alarm condition display)
10. Technical data
35