Trouble Shooting And Remedy; Service Address - Nilfisk FOOD Ecolab Naga Mode D'emploi

9.6. Trouble Shooting and
Remedy
Fault
No pressure / Insufficient or No water supply
too low pressure
The filter (if any) is clogged
Rinsing nozzle is not installed
Insufficient or No supply of diluted products
No foam creating
Product is not suitable
Incorrect nozzle
Non-return valve is blocked
Injector /mixing chamber
blocked
No spray No supply of dilute products
sanitising
Non-return valve is blocked
Injector /mixing chamber is
blocked
In case of errors/troubles not mentioned above, please contact your local
service technician for further assistance.

9.7. Service address

Please see the back cover of this manual
Cause
Open water supply valve
(See 5.1 – Closing valve)
Clean the filter
Place rinsing nozzle
Consult directions for use of
dosing unit
Choose suitable product
Place foam nozzle
Clean or replace non-return
valve
Clean nozzle
Consult directions for use of
dosing unit
Clean or replace non-return
valve
Clean Injector /mixing chamber
Remedy
17