JVC TH-M65 Manuel D'instructions page 15

Getting started
7 Connecting the satellite (front, center, surround) speakers (TH-M65)
Each speaker (SP-THM65F) can be used as a front or surround speaker.
CAUTION
• When you connect (larger) speakers other than the supplied ones, only use speakers with the same speaker impedance (SPEAKER IMPEDANCE)
as indicated by the speaker terminals on the rear of the powered subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
Before connecting the
speaker cords;
Twist and pull the insulation coat
off and remove.
Center speaker
(SP-THM65C)
Red
Black
Black
White
Surround speakers
(SP-THM65F)
Red
White
Insert the speaker cords into the speaker
terminals.
Front speakers
(SP-THM65F)
Black
Black
This page is for
Press and hold Insert the bare end of the
the clamp. speaker cord into the
terminal.
• Connect the white cords to the red (ª) terminals and black
cords to the black (·) terminals.
Powered subwoofer
Route the speaker cord as shown at right.
• Be sure to remove all slack from the cord
so that the speaker cord lies flat.
Release the
clamp.
12