Resume Playback; Selecting A View Angle; Selecting The Subtitle - JVC TH-C60 Manuel D'instructions

Advanced operations

Resume Playback

When Resume Playback is set to "ON" (see page
35) and you stop playback by the following
operations, the position where playback has been
stopped is stored. (RESUME indicator lights on
the display window.)
• Turning off the power* (See page 16.)
• Pressing 7 once
* Only when playing back a DVD.
To start playback from the stored position
Press 3 (play button) or DVD.
• There may be a case when 3 (play button) does not work after
changing the source. In this case, select DVD as a source.
• Pressing DISC (1-5) (with SHIFT pressed) on the remote control or
DISC (1-5) 3 on the center unit also resumes disc playback.
To clear the stored position
Press 7 again.
• Opening the disc tray with the playback disc also clears the stored
position.
NOTE
• When USB MEMORY is selected as the source, the beginning of a file
where playback has been stopped is stored.
• (For DivX) The beginning of a scene where playback has been
stopped may be stored.

Selecting a view angle

7 During playback of a disc containing multi-view angles
When using the ANGLE button:
1
Press ANGLE.
Example: The first view angle is selected out of 3 view angles
recorded.
2
Press ANGLE repeatedly, or press
Cursor Y/5 to select the desired view
angle.
When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight
3
Press ENTER.
4
Press Cursor Y/5 to select the desired
view angle.
5
Press ENTER.
6
Press ON SCREEN.
The on-screen bar disappears.

Selecting the subtitle

7 During playback of a disc/file containing
subtitles in several languages
When using the SUBTITLE button:
1
Press SUBTITLE.
Example (DVD VIDEO): "ENGLISH" is selected out of 3
subtitle languages recorded.
2
Press SUBTITLE repeatedly, or press
Cursor Y/5 to select the desired
subtitle.
For SVCD
• An SVCD can contain up to four subtitles. Pressing SUBTITLE
changes the subtitles regardless of whether the subtitles are
recorded or not. (Subtitles will not change if no subtitle is
recorded.)
To clear the subtitle
Select "OFF" in step 2.
When using the on-screen bar:
1
Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2
Press Cursor 3/2 to highlight
3
Press ENTER.
4
Press Cursor Y/5 repeatedly to select
the desired subtitle.
5
Press ENTER.
6
Press ON SCREEN.
The on-screen bar disappears.
To clear the subtitle
Select "OFF" in step 4.
NOTE
• Some subtitle or audio languages are abbreviated in the pop-up
window. See "The language codes list". (See page 33.)
• For DivX, you cannot operate this procedure using the on-screen bar.
.
See page 23 for button locations.
.
28