FloTech FT555F Mode D'emploi page 38

FloTech FT555F Automatic Overfill System Tester
Step 5) The FT555F will repeatedly test for the presence of any
wet sensors connected to the socket.
Step 6) Dip test a compartment and listen for a beep. The display
will also indicate the presence of a wet sensor.
Step 7) Continue testing each compartment.
Step 8) Stop the wet test by pressing any key.
NOTE: IF THE TESTER DOES NOT SEE ANY SENSORS
OR IS NOT CONNECTED, IT WILL DISPLAY THE
ABOVE SCREEN UNTIL IT SEES A SENSOR OR THE
TEST IS STOPPED.
Page 18 10784PA REV C FT555F Truck Tester