Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FloTech FT555F Automatic Overfill System Tester
AutoTest Optic/Therm
This screen will enable or disable the Optic or Thermistor tests
when performing an automatic test of the trailer overfill system.
This configuration is only for the automatic testing mode. All four
tests are available in the manual test selection.
Some regions may not have a need to test optic or thermistor type
systems as none are found in that region. Example, trailers in
California do not have Thermistor sockets so there is no need to
perform the Thermistor test. In this case the Optic test would be
enabled.
Press the "GO" button to choose between "Enable BOTH",
"Enable OPTIC" or "Enable THERM" Press the "TEST
SELECT" button to move to the next screen.
Auto Test Ground Bolt
Press the "GO" button to ENABLE or DISABLE the ground bolt
test during the automatic testing. PRESS "TEST SELECT" button
to move to the next screen.
FT555F Truck Tester
10784PA REV C
Page 9
Publicité
Table des Matières
