Program Mode - Hamilton Beach 33861 Mode D'emploi

Program Mode

Use Program Mode to select one heat and one time setting before the unit switches automatically to WARM.
1. Press to turn on. NOTE: If
no setting is selected in
30 seconds, the unit will turn
off automatically.
5. Press the up or down arrow to
set program time. The timer
can be adjusted in 30-minute
increments.
8
2. Press PROGRAM.
6. Press ENTER to start cooking and a long chime will sound.
NOTE: During the cycle, if the up or down arrow is pressed at any
time, only the timer will adjust. The heat setting cannot be changed.
IMPORTANT: NEVER lock clips during cooking. Only use wire
clips to secure lid when transporting.
3. Press the up or down arrow to
select heat setting. NOTE: Do
not use WARM setting to cook
food.
4. Heat setting will flash for
5 seconds before flashing
"00:00" is displayed.
7. When the timer reaches
"00:00," a short chime will
sound and the unit will switch
to WARM.